turbosol@hrcharvest.com

We are the Regional Manager for Asia Pacific Region, to co-ordinate sales activities and market development. TURBOSOL Produzione S.p.A. is a manufacturer of pump and equipment for common and special mortar, screed, ready-mixed plaster, concrete and grout.


  • MINI AVANT • MINI G • UNI 30 • POLI T


MINI AVANT

PUMP AND PLASTER SPRAYER FOR COMMON AND SPECIAL MORTARS

New version of the famous single-piston pump. Ideal for pumping and spraying traditional, ready-mixed and special mortars.

Small size plastering machines of easy use and great reliability. It may be driven by a single or a three-phase motor, and it has a piston pump with an output of 1.400 l/h of traditional plaster. Over 20.000 m 2 of plaster with one piston.

MINI AVANT in its VARIO version is fitted with an electronic speed programming device that makes it suitable for several purposes. It may be fed by a site mortar mixer or by a continuous mixer in case you are using ready-mixed dry plaster.

Back to Common & Special Mortars


MINI G

PUMP AND PLASTER SPRAYER FOR COMMON AND SPECIAL MORTARS

New version of the famous single-piston pump. Ideal for pumping and spraying traditional, ready-mixed and special mortars.

Version with an Honda gasoline driven prime mover of 5,5 HP with either electric or rope starter.

Back to Common & Special Mortars


UNI 30

SINGLE PISTON PUMP FOR SPRAYING MORTARS
AND MICRO-CONCRETE

Pump with single piston, ideal for pumping, transporting and spraying normal, structural and special mortars.

It is available with electric or diesel prime mover in the standard (S) version or with built-in mixer (MF). It is particularly suitable for several heavy duty applications ranging from the simple spraying or pumping to the injection of special mixes at controlled pressure. It is fitted with an automatic mechanical over-pressure device, a recycling device, pneumatic remote control for start/stop operations.

Back to Common & Special Mortars


POLI T

SINGLE-PHASE OR THREE-PHASE PLASTERING MACHINE FOR COMMON
AND SPECIAL MORTARS

Worm pump for mixing, pumping, spraying, injecting traditional, ready-mixed, insulating cementicious or special mortars.

A new version of the POLI T that has been realised and patented for a powerful torque with a little single-phase installed prime mover without tampering with its performance. POLI T is the plastering machine can be used for any specific job by the totality of the people working in the various fields of the building industry; Builders, Plasterers, Decorators, Screed layers, Specialists.

Back to Common & Special Mortars

For further information or enquiries, please contact us at turbosol@hrcharvest.com
or visit us at www.turbosol.com


  • APEMAT 190 E • TM 250 E • PRO H CL


APEMAT 190 E

ELECTRIC SCREED MIXING AND CONVEYING MACHINES

For mixing, transporting and elevating screeds, aggregates, mortars and concrete.

It is impressively suitable for mixing and transporting mixes in the building sites, renovation, maintenance of flats, small condominiums, houses, that are located down town or in difficult to reach locations. By using the single-phase APEMAT 190 (190 - 230 V) you do not need to subscribe expensive contracts of short term three-phase electricity supply or to use a current generator thus avoiding rental, transport, maintenance, noise.

Back to Screeds

RUBBER HOSES AND MAXIMUM PUMPABLE GRANULOMETRY
For granulometry of 0 ÷ 12 mm: hose Ø50x66 - length of 10 or 20 m (cam-lock couplings)
For granulometry of 0 ÷ 20 mm: hose Ø65x84 - length of 10 or 20 m (Perrot couplings)
TECHNICAL DATA APEMAT 190 E APEMAT 190 EB
Electric motor 2,2 Kw 2,2 + 0,75 Kw
Voltage 190 - 230V - 50Hz
Compressor 2.400 ÷ 2.500 l/m’ (air output at 6 bar)
Vessel capacity 190 l
Output per cycle 140 ÷ 160
Cycles per hour with compr. of 2500 l/m’ and 30 m hoses 15 ÷ 18 15 ÷ 18
Delivery height 30 ÷ 40 m (with compressor of 2500 l/m’ and 30 m hose)
Delivery distance 70 ÷ 80 m (with compressor of 2500 l/m’)
Loading bucket --- 200 l
Size (L x W x H) 170x102x125 cm 293*x102x215** cm
Weight 390 Kg 540 Kg
* with lowered bucket - ** with up-right bucket.


TRANSMAT 250 E

Thanks to the logical sequences used in the distribution of the power it is possible to drive this highly professional pump with only 5,5 kW.
In anyone of its three configurations. The optimum quality/running cost ratio give to the TM 250 E the sales record in Italy of the mostly used machine.

Back to Screeds
RUBBER HOSES AND MAXIMUM PUMPABLE GRANULOMETRY
For granulometry of 0 ÷ 12 mm: hose Ø50x66 - length of 10 or 20 m (cam-lock couplings)
For granulometry of 0 ÷ 20 mm: hose Ø65x84 - length of 10 or 20 m (Perrot couplings)
TECHNICAL DATA TM 250 E TM 250 EB TM 250 EB/P
Electric motor  5,5 Kw - 380V
Compressor  from 2400 to 2500 l/m’ (air output at 6 bar)
Vessel capacity   190 l
Output per cycle   from 140 to 160
Cycles per hour with compr. of 3.500 l/m’   from 15 to 18 from 15 to 18
Delivery height   from 30 to 40 m (with compressor of 2500 l/m’ and 30 m hose)
Delivery distance   from 70 to 80 m (with compressor of 2500 l/m’)
Loading bucket   - 200 l
Scraper      
Size (L x W x H)   170x102x125 cm 293*x102x215** cm
Weight   390 Kg 540 Kg
* with lowered bucket - ** with up-right bucket.


PRO H CL

WORM-GEAR PUMP FOR LARGE VOLUMES OF SELF-LEVELING SCREEDS

With hydraulic drive and worm pump.

THE ABSOLUTE NOVELTY IN THE
SELF-LEVELLING SCREED PUMPS.

Trailer mounted pump ideal for pumping large volumes of mixes such as self-leveling screeds based on anhydrite or cement and the foam concrete, cementicious mortars, micro-concrete. Without mixer it is served by a truck mixer or a batching plant.

HYDROTRONIC System.
The hydraulics in closed circuit offer the advantage of guaranteeing always the supply of maximum power, careless of the output you have selected. The result is a plaster sprayer truly made to measure, that can adapt itself to any specific requirement, by assuring always the maximum performance with a minimum fuel consumption. Multi-function switch board "intelligent" remote control Exclusive anti-theft system TAT.

Back to Screeds

Next Page >>

For further information or enquiries, please contact us at turbosol@hrcharvest.com
or visit us at www.turbosol.com

Information provided on this website is subject to changes, without prior notice.