taiver@hrcharvest.com
We are the Regional Manager for TAIVER S.r.l for the Asia Pacific Region. Taiver is a manufacturer for wide range of spray painting lines of equipment and grouting pumps. The introduction of HTP 21000 airless piston spray pump is the latest technology for skim coat and thick materials application.

GOLD 4.200 • HTP 21000 • HTP 44000 • 12000 BI-MIX

(HIGH PRESSURE CHEMICAL GROUTING PUMP)
FOR POLYURETHANE & LPL EPOXY GROUT

GOLD 4200 is an airless diaphragm pump designed for multi usage. It is the ideal pump for small-medium works in building work, for spraying of paints in carpentry and handicraft work and also special grouting application work at construction sites.

This pump is widely used for high-pressure chemical grouting work in concrete structures. Chemicals such as Polyurethane grout and Long Pot Life epoxy (LPL) are commonly pump through this user-friendly pump.
Technical Data:
• Motor: Electric singlephase
• Power: 1 HP
• Weight: 19 kg
• Max. Pressure: 200 bar
• Voltage: 230 Volt/50 Hz
• Max. delivery with spray tip: 50 Mesh

CONSTRUCTION SPECIFICATIONS:
The electric motor GOLD 4200 is H class, that means:
maximum quality and safety. It can work in very bad conditions and with very high temperature. An automatic system stops the pump when exceeding the electric safety limits. The head block are in aluminium with hard nickel treatment, the valves in tungsten carbide. GOLD 4200 has been designed for an easy maintenance.

The airless system allows a high working speed and reduces the overspray, therefore paint and solvent saving. Less overspray means also less pollution and benefits for the worker's health!

Back to Top




TAIVER HTP 21000 is the newest pump from the wide TAIVER range. It has been designed for spraying all kind of tixothropic products in Building, Water-proofing application, industrial carpentry, etc… It is ideal for plaster-applicators who want to have a new technology for plaster applications or stuccoworks on walls. TAIVER HTP 21000 allows the maximum efficiency and a long life!!!

Performances:
• Ideal for big jobs!!
• Slower and longer cycles to improve the life of the pump
• Hydraulic system at very high volume in order to grant a perfect
  perfomance even in hard work’s conditions
• The cylinder and the relief valve have a manual start as to offer an
  easy and fast maintenance
• Piston and cylinder are in hard chrome for a long life
• New system of self-adjusting packings which avoid the premature
  wear due to continuous manual adjustings
Technical Specifications:
• Motor: HP 3
• Max. Spray Tip: .052”
• Max. Delivery: 10 ltr./min.
• Max. Pressure: 220 bar
• Cycle per liter: 18
• Paint filter: 50 Mesh
• Weight: 80 Kg

Back to Top




Performances:
• Ideal for big jobs!!
• Slower and longer cycles to improve the life of the
  pump
• Hydraulic system at very high volume in order to grant
  a perfect performance even in hard work’s conditions
• The cylinder and the relief valve have a manual start as
   to offer an easy and fast maintenance
• Piston and cylinder are in hard chrome for long life
• New system of self-adjusting packings which avoid the   premature wear due to continuous manual adjustings

Back to Top


From TAIVER range a NEW hydro-pneumatic pump
HTP 44000!!! Built to spray very thick coatings in the
heavy industry, in building (roof-coating) and for big jobs.
HTP 44000 is ideal to spray with two or more guns
continuously and with the maximum efficiency!

Technical Data:
• Motor: Gas Engine - Honda
13 HP - Electric start
• Max. Spray Tip: 1 gun: .060"
• Max. Delivery: 12.5 ltr./min.
• Max. Pressure: 4.000 psi (274 bar)
• Cycle per liter: 13
• Filter: 50 Mesh
• Dimensions: cm. 93x63x94
• Weight: 167 Kg








 





12000 BI-MIX is a new and original bicomponent unit. It has been designed to work continuously and without problems with products to catalyze.

12000 BI-MIX is equipped of a pneumatic sounding alarm system. If one of the two components has a problem, the pump stops automatically and a sounding alarm advice the operator. All the parts in contact with the products are in stainless steel. Besides 12000 BI-MIX is equipped by a third pump for a rapid cleaning.

Features:

• Relation between the product A and B adjustable from
  18% to 90%
• Included the third pump for cleaning
• Pneumatic sounding alarm system
• All the parts in contact with the products are in Stainless steel
• Handy and easy to use

Back to Top

For further information or enquiries, please contact us at taiver@hrcharvest.com
or visit us at www.taiver.com

Information provided on this website is subject to changes, without prior notice.